Want to Learn to Make Crate Seats for Your Home or Classroom?

Step 1

• Go get those materials!

Materials and Stores:

1. Plywood at Home Depot or Lowes
   • Home Depot will cut the wood for you. 2 cuts free and then $0.50 a cut after that.
   • Tip: Bring a crate with you! I had the home depot worker make sure the cut was correct.
2. Fabric at JoAnn Fabrics, Walmart or anywhere you would like to get fabric.
3. Foam- 1 inch or 2 inch at JoAnn Fabrics
4. Staple gun
5. Sander
6. Fabric Scissors
7. Crates (I use the Walmart Sterilite ones)

Step 2

• Sand the wood and make sure each piece fits perfectly in your crate.
• Cut the foam to the correct size
• Cut the fabric to the correct size (bigger than the wood)
  • Make sure you have enough room to put the fabric on the wood.

Step 3

• Wrap the fabric over the board and use a staple gun to staple the sides.
  • You can choose to wrap the whole thing with fabric or staple close to the sides (personal preference)
  • Tip: Don’t forget the handles!

Step 4

• Measure and make sure your crate seat fits in your crate!

Want to see my finished products?Click Here

Don’t feel like putting the time and energy into making them?  I will make them for you!Click here to purchase.